G4 Ceramic Socket
A screw-in G4 socket to allow fitting of additional G4 LEDs.
Two wires from rear for connection to 12 volt DC supply.
Suitable for fitting LED bulbs into the rear of fluorescent lighting fittings for easy conversion from fluorescent to LED.
find out more
18 Watt LED Driver
240v AC to 12 Volt DC Transformer.
This power supply is suitable for driving LED lights up to 18 watts (1.5 Amps).
Constant voltage - suitable for non-dimming Flexible Strips.
Small size (95mm x 43mm x 21mm
Double insulation.
Screw terminals.
CE, RoHS and TUV certified
Power Factor >0.95
Efficiency >81%
Isolation 3000v AC
Will drive:
3.6 metres of Standard Flexible Strip.
2 metres of Double Output Flexible Strip.
1.2 metres of Triple Output Flexible Strip.
find out more
5 Watt LED Driver
240v AC to 12 Volt DC Transformer.
This power supply is suitable for driving LED lights up to 5 watts (420mA).
Constant voltage - suitable for non-dimming Flexible Strips.
Small size (56mm x 40mm x 20mm) so ideal for driving MR16 LED bulbs where existing the transformer designed for halogen bulbs is not suitable for LED power requirements.
Double insulation.
Screw terminals.
CE, RoHS and TUV certified.
Power Factor >0.95
Efficiency >81%
Isolation 3000v AC
Will Drive:
1 metre of Standard Output Flexible Strip.
0.55 metres of Double Output Flexible Strip.
find out more
If this is the first time you've considered LEDs, or you're not sure about something, don't hesitate to call Paul or Julie on 07901 852950
 A range of flexible LED strips to enhance the interior or exterior of your home, business, vehicle or boat as well as highlighting jewellery, glass, model displays etc. If you want to use them at home all you need is an appropriate 240volt AC - 12 volt DC Transformer. Please phone us for advice. The strips are available in varying light outputs and are usually dimmable if you want to vary the mood. |
 |
|
